Al-Nahrain Journal for Engineering Sciences

The phenomenon of climate change resulting from the increase of global warming has become one of the main problems facing the world. Where researchers and specialists have worked for many years to find a solution that reduces this phenomenon and limits its risks. It is likely that clean energy is an alternative to fossil fuel sources, which are the main source of global warming. One of the clean energy sources is ocean wave energy, which is a huge and untapped energy source, despite the possibility of extracting large energy from waves. This paper focuses on the study of deep-sea turbines and their results. A study was conducted on the capture chamber. Where this paper presents an experimental model of a water tank with certain dimensions in the university laboratories to describe the dynamic behavior of the capture chamber. The Froude number scale was used to model the dimensions and depth of the water as well as the wave properties. Through experimental work and its results show, and it was found that the power generated by the motion of the wave strength is related to the height and frequency of the wave.

A failing heart can be supported in several ways, including cardiopulmonary bypass pumps (CPB), extracorporeal membrane oxygenators (ECMOs), and other types of auxiliary heart pumps. The intra-aortic-balloon-pump (IABP) is one technique of internal counter-pulsation that supports maintaining the circulatory system It continues to be used as a vascular support device to critically unwell cardiac patients. Many recent studies have focused on the problems of the (IABP) in open-heart surgery, while other researchers concentrated on the positioning and size of the balloon, some of them studied the timing of the balloon's inflation and deflation. this paper has reviewed a brief Introduction, the basic principles of the balloon, how to trigger the balloon pump as well as the use of IABP in Coronary Artery Bypass Graft (CABG), balloon mistiming of inflation and deflation, balloon timing usage within open-heart surgery and finally a balloon position and sizing.

Three decades of empirical research have proven that well-being in humans is stimulated by designs that link people to natural elements and landscapes. Environmental psychology research also revealed that these characteristics can lower stress and anxiety while having a positive impact on human productivity. therefore, there were more recent interest from theorists and architects to discover approaches to re-connect the constructed environment with the natural components. One of the most current theories of re-communication and its use in architecture is called "biophilia.". Therefore, the research problem is the lack of knowledge of biophilic architecture and what are the most prominent features affecting the user. the research aims to shed light on the basics of this design theory as well as testing its design patters in the educational environment to find out which attributes are most effective for users in improving productivity and well-being By adopting the quantitative descriptive approach and based on a questionnaire for the purpose of adopting it in design and to aid in the practical application of the Biophilia idea by designers and architects. The research concluded that there are design features that are more important than others for educational buildings, such as (day light, water, air, plants, landscapes, mobility, integrating the parts to create the whole).

Natural convection air heat transfer and fluid movement currents around a hot circular cylinder inside an inclined triangular enclosure has been analyzed experimentally. Three different sizes of an enclosure with a long side of 20, 25, and 30 cm, the thickness of 1 mm, and depth of 50 cm were used in the present work to give three radius ratios. The effect of Ray-leigh number, radius ratio, the rotation angle of triangle enclosure, and the inclination angle of the apparatus with horizontal axis θ on the heat transfer process was investigated. The ranges of these parameters were: Rayleigh number from 5×106 to 2.5×108, radius ratio (0.345, 0.455, and 0.618), rota-tion angle (0o, 45o, and 90o), and inclination angle (0o, 45o and 90o). The results show that the heat transfer rates increase with increase in Rayleigh number and as the rotation angle of enclosure is changed from 0o to 90o. Moreover, the heat transfer rate increases linearly with Rayleigh number at higher radius at rotation angle 0o, 90o only. While, it increases slightly with Rayleigh number at rotation angle 45o. Additionally, the higher heat transfer rates occur at vertical position of enclosure inclination angle 90o and rota-tion angle 0o (the base of triangle at the bottom) and it decreases as inclina-tion angle deviates from 90o to 0o. This behavior is reverse completely at higher radius ratio 0.618. Empirical correlations for the average Nusselt number has been found to depend on Rayleigh number., radius ratio, rota-tion angle and inclination angle.

Additionally, it has been demonstrated that osseointegrated implantation offers superior proprioception and control over the prosthesis, enabling more natural movement and improved functional results. Additionally, it lowers the chance of falling and increases energy transfer efficiency, making it simpler for amputees to engage in physical activity. Furthermore, as compared to conventional socket prosthesis attachment, osseointegrated implantation has been linked to higher patient satisfaction and quality of life.
It is crucial to remember that osseointegration is a surgical operation with risks including infection and implant failure. Additionally, for effective implantation, it needs a specific amount and quality of bone, which may restrict its usage in some individuals. Furthermore, osseointegrated implantation could be more expensive than conventional socket prosthetics.
Understanding the efficacy and safety of this method requires research on complication rates and outcome metrics in patients having osseointegrated prosthesis implantation. You may acquire information on things like infection rates, implant failure, patient satisfaction, and functional results by studying original research papers. Clinical decision-making can then be improved with the use of this information.
In transfemoral amputees, osseointegration has showed promise as a powerful substitute for socket prostheses. A growing corpus of research has shown that osseointegrated implantation provides advantages in terms of increasing mobility, decreasing discomfort, and improving general quality of life. The efficiency of osseointegration for transtibial and upper extremity implants has received little attention.
Minor soft tissue infections are the most frequent consequences, although they are manageable with the right treatment and monitoring. To further reduce the risk of problems and improve the overall success of osseointegrated implantation, research and development are ongoingly focused on enhancing surgical methods and implant design.
Although osseointegration has a lot of potential, not all amputees may be good candidates for it. Considerations for osseointegrated implantation must take into consideration elements including the degree and nature of the amputation, the quality and density of the bone, and the desires of the patient.

This study examines the flow behavior and lift coefficient variations of a NACA 4415 airfoil using different vortex generator configurations. Experimental investigations are conducted in a subsonic wind tunnel at a Reynolds number of 1.8 x 105. The airfoil is tested with two types of vortex generators, namely the dome vortex and the convergent-divergent vortex, positioned at 10%, 28%, and 60% chord locations. Experimental lift coefficients are compared with Airfoil Tools database, showing consistent agreement within an angle of attack range of 0 to 18 degrees. At small angles of attack (0 to 8 degrees), the lift coefficients of the NACA 4415 airfoil with the dome vortex at 10%, 28%, and 60% chord positions are lower compared to the baseline configuration. However, beyond 14 degrees, the highest lift coefficient value after the angle range of 14-18 degrees is achieved at the 60% chord position with the dome vortex, 10.43% increase compared to the baseline lift coefficient. Furthermore, the best value for the lift coefficient after the angle range of 16-18 degrees at the 10% chord position is achieved with the dome vortex, where the maximum lift coefficient 9.4% increase compared to the baseline lift coefficient. It is noted that the baseline configuration consistently outperforms the convergent-divergent vortex configurations.

Authors affiliations:
1*) Civil Engineering Department, AI-Nahrain University, Baghdad-Iraq.
saraghazai2828@gmail.com

2)Forensic DNA Center for Research and Training AI-Nahrain University, Baghdad-Iraq.
faiqalzwainy@gmail.com

3)Universidad Distrital Francisco Jos'e de Caldas,. Vellore Institute of Technology, California, United States.
gmanogaran@udistrital.edu.co

Paper History:
Received: 27th May 2023
Revised: 15th June 2023
Accepted: 11th Aug. 2023 Abstract
This study focuses on the performance evaluation of ready-mix concrete production plants in the Republic of Iraq. The lack of modern plant performance assessment technology has hindered the construction industry's progress. Traditional evaluation methods relying on financial measures have yielded unrealistic results. To address this issue, there is a need to utilize modern models and methods for performance evaluation. The main objective of this study was to conduct a systematic literature review on the evaluation of concrete production plants. A literature review methodology was used, utilizing digital databases and scientific platforms from (2015 to 2023). The study provides a comprehensive overview of performance evaluation, including definitions, importance, and introduction to modern models and methods. No previous studies on evaluating ready-mix concrete production plants in Iraq were found, but relevant studies from Egypt, Sudan, and India were analyzed. These studies discussed concrete mixing plant classification, advantages, disadvantages, and factors influencing plant performance. They also conducted statistical analyses using the SPSS software and evaluated plant performance, including plant arrangement, quality control systems, and final product quality. Previous studies revealed that 75% of concrete production plants did not meet the required criteria, while only 25% demonstrated satisfactory performance. The study proposes improvements to enhance the performance rate by considering influential variables identified in the literature and using modern models for performance evaluation.

Platinum, copper, and nickel were founded the best metals used in resistance temperature detectors RTDs. They commonly used in laboratory and industrial applications because they provide accurate and reliable measurements in a wide temperature range from (- 200 to 850 °C). They have high conductivity, sensitivity, and hardness to resist strain shock, pressure, and vibration.
The accuracy level of them depends on reliability, stability, repeatability, linearity, and response to time. This study aims to determine and compare the accuracy of these three metals in regarding to their features which include stability, repeatability, and response time. The study has gathered and analyzed the data of these suitable and precise metals and compared with each other.
The results showed that platinum is widely needed for RTDs due to its precision, stability, higher accuracy, and linearity output, while copper and nickel are not stable or repeatable as platinum. It was indicated that temperature coefficient of resistance TCR for nickel is bigger and for copper is medium, but for platinum is lower.

Cancer is a disease caused by uncontrollable cell growth and division. Surgery, chemotherapy, radiotherapy, and hormonotherapy are all cancer treatment options. In addition to noninvasive cancer ablative therapy. As an example, ultrasonic therapy, even with low-intensity pulsed ultrasound (LIPUS) or high-intensity focused ultrasound (HIFU), and Laser therapy (photo-biomodulation therapy) in low-level laser therapy (LLLT) with different wavelength ranges from ultraviolet (UV), visible and infrared (IR) that all have demonstrated different results depending on the target of treatment so previous trials therapies are being studied. This paper reviews recent studies on the in vitro treatment effect of ultrasound therapy and laser therapy on normal and cancerous cell lines with specific parameters. The effect of ultrasound results showed a decrease in cell proliferation and an increase in apoptosis in different types of cells, depending especially on sound intensity, known as Special Peak Temporal Average Intensity (ISPTA). While the laser effect is noticed on cell viability, either enhance or inhibit their viability depending upon the dose of exposure and other specific parameters like wavelength, energy density, and power density used in each treatment protocol. The previous studies conclude that each response would have a treatment method with specific parameters, even an increase or decrease in cell viability. Further studies need to be applying these methods in vivo.

It is essential to review and develop a system of water control structures and canals that can be used to manage high-flow discharges and the flood control plan requirement to modify the system's capacity. Al-Ramadi Project System is considered one of the main flood control projects on the Euphrates River within Anbar Governorate, Western Iraq. This study will focus on Al-Majjarah Canal and Regulator, which is part of Al-Ramadi Project and has the function of a link canal between Al-Habbaniyah and Al-Razazza lakes, and describe the capacity of the canal under typical operating conditions and during floods. The study used HEC-RAS 6.1 software to run a numerical model to simulate this canal. According to previous research studies near the research region on the Euphrates River, for the main canal, the roughness coefficient was taken at 0.026, and for the flood plain, it was taken at 0.03. The same parameter value was applied to Al-Majjarah Canal. Due to the study region's similar geology and nature. Moreover, a sensitivity analysis was made of the roughness coefficient and its influence on the water surface elevation for the canal.
The model result indicated in the current situation of Al-Majjarah Canal can pass a flow rate of 1300 m3/s when Al-Razazza Lake is at an average water level that has been approved by the Ministry of Water Resources at 32.02 m.a.m.s.l.. If the water level in Al-Razazza Lake is in the semi-filled position of 40 m.a.m.s.l., it causes floods for the canal because the water level rises above the banks of the canal at the last kilometer from the canal, even when passing a few discharges through the canal. Accordingly, it is not possible to safely pass the flow rate for a flood wave with a 500-year return period predicted by the "Study of Strategy for Water and Land Resources in Iraq (2014)", which is 2000 m3/s for this canal, without making modifications to the expansion of Al-Majjarah Regulator by adding additional gates, expanding the entrance and exit of the Regulator, reshaping and expanding some cross-sections, and raising some of the banks for the canal. The above-mentioned modification were applied for the purpose of passing the expected discharge from the canal, while maintaining a freeboard of 1 m between the water surface and the canal banks.

This research aims to develop and validate a smart PMS. The PMS will create a foundation for PMSs that will be used by organizations in the digital era. A three-step methodology was used in the current research. First, the archival literature analysis was used to identify the features and elements of the robust PMSs. Second, a generic PMS was constructed based on the results of the first step. Third, the generic PMS was amended, implemented in the workshop, and validated by discussing the results with a focus group of experts. The academic and technical contribution can be seen in proposing a generic Virtual Organizational Deoxyribonucleic Acid (V-DNA) concept and smart PMS (Performance Management Dashboard (PMD) and Decision-Making Tool (DMT)) based on the features and elements of the robust PMSs. The generic V-DNA and PMS were amended and implemented in the stated workshop. Then, the validation process was done by presenting the implementation results to a focus group of academic experts and taking their feedback. Applying the PMD and the DMT to monitor, analyze, and manage workshop performance was successful. The PMD proved a useful tool that can provide a holistic view of the workshop performance areas instead of focusing on isolated business aspects such as workshop productivity or efficiency. The decision-makers directly identified the low-performing and highly performing KPIs/processes/sub-processes and identified the root causes of low and high performance. The DMT proved a useful tool. The decision-makers could evaluate all sub-processes and rank them based on the values and weights of the decision-making criteria, highlighting the areas that need improvement. The originality and novelty of the proposed PMS and the V-DNA were proved through a systematic literature review process. The implications of the research can be seen in the possibility of testing the generic V-DNA and the PMS templates in organizations of different sizes and sectors to check their applicability. Moreover, other layers of the organizational V-DNA can be proposed. The current research assists the practitioners and managers in constructing the PMSs they need for their workshops/factories/companies.