Abstract
Incremental forming is a flexible sheet metal forming process which is performed by utilizing simple tools to locally deform a sheet of metal along a predefined tool path without using of dies. This work presents the single point incremental forming process for producing pyramid geometry and studies the effect of tool geometry, tool diameter, and spindle speed on the residual stresses. The residual stresses were measured by ORIONRKS 6000 test measuring instrument. This instrument was used with four angles of (0º,15º,30º, and 45º) and the average value of residual stresses was determined, the value of the residual stress in the original blanks was (10.626 MPa). The X-ray diffraction technology was used to measure the residual stresses. The sheet material used was Aluminum alloy (AL1050) with thickness of (0.9 mm). The experimental tests in this work were done on the computer numerical control (CNC) vertical milling machine. The extracted results from the single point incremental forming process were analyzed using analysis of variance (ANOVA) to predict the effect of forming parameters on the residual stresses. The optimum value of the residual stresses (55.024 MPa) was found when using the flat end with round corner tool and radius of (3 mm), wall angle of (55°) and a rotational speed of the tool of (800 rpm). The minimum value of the residual stresses (24.389MPa) was found when using hemispherical tool with diameter of (12 mm), wall angle of (45°) and a rotational speed of the tool of (800 rpm).
Keywords
ANOVA
CNC milling machine
Residual stresses
SPIF process
Taguchi method.
Abstract
تعد عملية التشكيل التزايدي عملية مرنة لتشكيل الصفائح المعدنية باستخدام ادوات بسيطة والتي فيها تتعرض الصفيحة المعدنية لتشويه منتظم على طول مسار عدة محدد مسبقاً وبدون استخدام القوالب. يستعرض هذا العمل عملية التشكيل النقطي التزايدي المستخدمة لإنتاج شكل هرمي ودراسة تأثير شكل العدة، قطرها وسرعة الدوران على الاجهادات المتبقية. تم قياس الاجهادات المتبقية بوساطة جهاز (ORIONRKS 6000). يعمل هذا الجهاز مع أربع زوايا هي (صفر، 15، 30، و45 درجة) ويؤخذ معدل الاجهادات المتبقية، قيمة الاجهادات المتبقية في الصفيحة الاصلية (10.626 ميكاياسكال). تستخدم تقنية تشتت الاشعة لقياس الاجهادات المتبقية. الصفيحة المعدنية المستخدمة هي سبيكة الالمنيوم (AL1050) بسمك (0.9 ملم). وأجريت الاختبارات العملية في هذا العمل على ماكينة التفريز العمودية المبرمجة. النتائج المستخرجة من عملية التشكيل النقطي التزايدي تم تحليلها باستخدام انموذج تحليل التباين لمعرفة تأثير متغيرات عملية التشكيل على الاجهادات المتبقية. تم ايجاد اعلى قيمة للإجهادات المتبقية (55.024 ميكاباسكال) عند استخدام عدة ذات نهاية مسطحة مع تقوس في نهايتها بنصف قطر (3 ملم)، زاوية الجدار (55 درجة) والسرعة الدورانية للعدة (800 دروة بالدقيقة). وتم ايجاد اقل قيمة للإجهادات المتبقية (24.389 ميكاباسكال) عند استخدام عدة شبه كروية قطرها (12 ملم)، زاوية الجدار (45 درجة) والسرعة الدورانية للعدة (800 دروة بالدقيقة).