Iraqi Journal of Science

In this work, combining acyclovir with ciprofloxacin (CCP), a new Schiff base and its metal complexes with iron (III), manganese (II), copper (II), zinc (II), and calcium (II) ions are synthesized and structurally characterized by XRD, SEM, 1H NMR, 13C NMR, FT-IR, and UV-Visible spectral techniques. Furthermore, molecular docking studies were carried out, and the complexes were tested to resolve any potential hang-ups in opposition to the Herpes virus and DFT calculation studies. In addition, the metal complexes and ligand were screened against antibacterial strains of one gram-positive bacteria (Staphylococcus aureus) and three gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumonia), and it was established that these complexes demonstrate dissimilar bustles of inhibition on the enlargement of the bacteria.

According to the high operational costs, low stability, and reusability of enzymes, immobilization by nanoparticle gathering has increased in recent years. Iron oxide nanoparticles (magnetite nanoparticles, Fe₃O₄) have been prepared by mixing one volume of iron dioxide ions and two volumes of iron trioxide ions with HCl via the precipitation of iron salts by NH₄OH. The features of magnetic nanoparticles have been studied by Atomic Force Microscopy (AFM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscopy (SEM). The prepared Fe3O4 was used in the adsorption method to immobilize the galactosidase enzyme. The immobilized enzyme has been compared with the crude one by optimizing time, PH, temperature, substrate solution concentration, and enzyme solution concentration. As a result, the immobilized enzyme has exhibited higher activity over long storage times, and a wide PH and temperature range than crude enzyme. In addition, whatever the substrate and enzyme concentrations, the activity of the immobilized enzyme increased over the non-immobilized one. As a result, a lower Km value for immobilized D-galactosidase indicates a higher affinity for the substrate than crude D-galactosidase.

Creatinine and Schiff`s bases are well known for their diverse range of biological activities and are thought to be emerging and useful therapeutic targets for the treatment of several diseases. The present work was aimed at the synthesis of new imidazolidine-4-one, thiazolidine-4-one, and oxazolidine-4-one derivatives derived from creatinine and to illustrate their influence on a colon cancer cell line and assess their antioxidant activity. Creatinine was reacted with α-chloroethyl acetate to produce 2-ethyl acetate creatinine 1. Then, the reaction of compound 1 with n-propyl bromide afforded N-propyl-2-ethylacetate creatinine 2. Compound 2 was then reacted with hydrazine hydrate to give hydrazide derivative 3. Schiff bases 4-6 were synthesized via the reaction of compound 3 with aromatic aldehydes (benzaldehyde and p-hydroxybenzaldehyde) and a ketone (p-amino acetophenone) in the presence of glacial acetic acid as a catalyst. Finally, Schiff bases 4-6 were treated with 2-aminoacetic acid to synthesize imidazolidine-4-one derivatives 7-9, with 2-thioglycolic acid to prepare thiazolidine-4-one derivatives 10-12, and with glycolic acid to synthesize oxazolidine-4-one derivatives 13-15. The newly synthesized compounds were identified using FT-IR and 1H NMR spectroscopy. In addition, the antioxidant and anticancer activities of some of the synthesized compounds were evaluated in vitro and showed good results.

In this work, we presented a study of the structural formula for a new series of complexes with Ag(I), Cu(II), Zn(II), and Cd(II) derived from the guanine azo dye ligand 2-amino-8-((3-hydroxyphenyl)diazinyl)-1,7-dihydro-6H-purin-6-one (HAG), which is investigated using various physicochemical analyses, spectroscopic techniques (FT-IR, U.V-VIS, and 1H NMR), thermogravimetric analysis (TGA). In addition, elemental analyses, magnetic susceptibility, and molar conductance measurements were all stabilized. As well as the mole ratio, stability constant, and Gibbs free energy were studied for all complexes, where they showed high stability and spontaneous synthesis. The Cu(II) complex was suggested to have octahedral stereochemistry, while the Ag(I), Zn(II), and Cd(II) complexes were suggested to have tetrahedral stereochemistry. The ligand has been demonstrated to be a useful acid-base indicator, and it has been shown that the ligand (HAG) and its complexes exhibit high photostability and have various colors that can be used to dye wool materials.

Serious gases have been highly related to being prejudiced against human life within the environment. The evolution of a trustworthy gas sensor with an elevated response is of major importance for detecting various hazardous gases. Titanium dioxide (TiO2) nanotubes (TNTs) are favorable candidates with considerable potential and stellar performance in gas sensor applications. In this work, we have studied the effect of voltage on preparing TiO2 nanotubular arrays via the anodization technique for gas sensor applications. A simple electrochemical anodization approach was used to synthesize titanium dioxide nanotubes. Diverse techniques of characterization were used to evaluate TNTs. The results gained from field emission scanning electron microscopy (FESEM), energy dispersion spectroscopy (EDS), and X-ray diffraction (XRD) indicate that TiO2 was formed. Gas sensors were created, and the gas detection characteristics were directed towards hydrogen sulfide (H2S), which is not a healthy gas. The sensor made from these nanotubes responds well to this gas at different temperatures and has high sensitivity. The H2S-detecting characteristics were evaluated at values ranging from room temperature up to 300 oC. Results show that the gas sensor TNTs that was prepared at 30 volt for H2S gas sensing has the highest sensitivity and shortest response time at room temperature.

Bodies of water are usually being polluted by wastes from domestic and industrial sources thereby making them unfit for use. Hence, this study aimed at assessing the water quality from Asa River, Ilorin, Nigeria in terms of bacteriological and physicochemical parameters. The bacteriological parameters assessed were heterotrophic bacterial count, total coliform, faecal coliform, identification of the isolates, antibiotic resistance patterns, and plasmid profile of the isolates. Whereas, the assessed physicochemical parameters were pH, total chloride, suspended solid, and total hardness. The heterotrophic bacterial count, total coliform, and faecal coliform counts ranged from 7.6 x 103 to 3.2 x 106 cfu/ml, 9 to 24000 MPN/ 100ml and 0 to 6.0 x 103 cfu/ml respectively. Bacteriological analysis showed that the water contained arrays of bacteria heavily contaminated with pathogens. The genera of bacteria isolated were Escherichia, Pseudomonas, Brevundimonas, Enterococcus, Burkholderia, Enterobacter, Proteus, Pasteurella and Aeromonas. The pH, total hardness, total chloride, and suspended solids of the water ranged from 6.2 to 7.9, 128 to 291 mg/l, 6.21 to 17.04 mg/l and 170 to 310 mg/l respectively. All the Gram-negative bacteria were resistant to cefuroxime, cefixime, augmentin, and ceftazidime. Whereas all the Gram-positive bacteria were resistant to cefuroxime, cloxacillin, augmentin, and vancomycin. The bacteria also showed multiple antibiotic resistance. The resistance of Pasteurella multocida to nitrofurantoin was plasmid mediated. After plasmid curing, Brevundimonas diminuta was susceptible to ciprofloxacin and intermediately susceptible to gentamicin, while Pseudomonas fluorescens was susceptible to ofloxacin and ceftazidime and intermediately susceptible to ciprofloxacin. It was concluded that the water from Asa River at the different sampling points was unsafe in term of bacteriological as well as some physicochemical qualities. It is recommended that this water should not be used in its present state without treatment. Discharge of industrial, agricultural and domestic wastes should be stopped; and open defecation at the bank of this river should be discouraged.

Water treatment plants play an important role in the purification and distribution of safe drinking water to the public. The present study focused on the performance assessment of the Al-Rasheed water treatment plant [ARWTP]. The main objectives of the assessment were to determine the efficiency of various plant units as well as the quality of inlet water from the Tigris River. Results obtained from the collected data indicated the presence of high concentrations of soluble nitrate and phosphate ions in the filtered water. The removal efficiency of alkalinity, EC, total hardness, SO4, Cl, NO3 and PO4 were found to be (+11.05%), (-0.67%), (-29.33%), (-2.64%), (-6.25%), (-32.13%), and (0%) respectively. The removal efficiency was negative for some parameters which means that the concentration before treatment was less than the concentration after treatment. Water treatment facilities in Al-Rasheed water treatment plant need modernization and rehabilitation. Using pre-chlorination as an effective method for the controlling algal growth in the conventional water treatment plants is highly recommended.

Municipal solid waste generation, management, and dumping are economic and ecological concerns that metropolitan areas, particularly those in developing nations, must address. This study intended to ascertain the impacts of solid waste on the quality of groundwater around trash dumps located inside and surrounding landfill sites in the city of Erbil. Samples of groundwater, as well as two samples of leachate, were collected from eight wells situated near landfills during the dry and rainy seasons of August 2021 and February 2022. Several physico-chemical parameters, including pH, EC, NO2, NO3, alkalinity, HCO3, Na, Ca, Mg, Cl, SAR, total hardness, and heavy metals, were evaluated in the samples. During fieldwork, water quality index (z) measurements for summer and winter were combined with longitude (x) and latitude (y) information gathered by GPS. Using the inverse distance weighting approach, integrated xyz data was interpolated in ArcMap GIS software to measure the groundwater quality of the research region. According the CCME Water Quality Index, wells 4 and 8 had WQIs ranging from fair to marginal in both the winter and summer seasons (WQI). According to the data, cadmium contents in summertime were much greater (0.430–2.066 mg. l-) than the WHO standard (0.003 mg. l-1), deeming them unfit for human use. And that the high lead level in the summer (0.843-2.600 mg. l-1) is caused by too many Pb batteries being thrown away.

The study aims to detect the presence of carbapenems genes and the prevalence of antibiotic-resistant E. coli in the Tigris River. Samples were collected from three sites of the Tigris River: S1Adhamiya, S2 Medical city hospital, and S3 Abu Nuwas. It diagnosed 40 isolates of E. coli out of 67 isolates of bacteria by Vitek2. The antibiotic sensitivity was determined by the disk diffusion method. E.coli isolates were tested against 7 antibiotics these belonged to β-lactam, Carbapenem. Also, the resistance genes) ) ) blaVIM and blaNDM) detected for these isolates of E. coli. The results appeared resistance of E.coli against AMC 82.5%, PRL 62.5%, AM 55%, and moderate resistance against CRO 45% whereas little resistance against ATM 27.5% and carbapenem including IPM 5%and MRP 5%. Also, the results of resistance genes have appeared in two isolates that have the resistance gene blaVIM (5%) and one isolate has blaNDM genes (2.5%). These isolates appeared resistant to β-lactam group antibiotics and little resistance to E. coli to carpamenes antibiotics (IMP, MER).

A number of disorders characterized by aberrant cell proliferation are referred to as cancers. Cancer is a complicated group of mutagenic diseases that can move or infiltrate to other parts of the body. It develops through a multi-step process. The need for new therapeutic strategies is driven by malignancies resistance to conventional therapies. Use of the Newcastle disease virus as an oncolytic agent has advanced and expanded in immunocompetent carcinoma tumor models by utilizing reverse genetics techniques. Preclinical investigations have shown that recombinant NDV (rNDV-GFP), which expresses foreign genes, is proven to be effective in cancer treatment. Green fluorescent protein gene is usually used as an expression reporter for certain genetically encoded molecular biomarkers. To demonstrate that a gene may be expressed in many organs, interest cells or across an organism, it was utilized to make GFP-expressing biosensors. GFP has been detected in human cells as well as bacteria, yeasts, fungi, fish and other animals. The aim was to investigate the anti-tumor effects of rNDV expressing GFP gene on U78-MG glioblastoma cell line in vitro. This research examined in vitro the anticancer activity of genetically modified Newcastle disease virus strains that express GFP (rClone3-GFP) using the MTT test (a colorimetric assay for measuring cell metabolic activity) on the U87-MG glioblastoma cell line. Recombinant viruses were found to be able to trigger a time-dependent demise of tumor cells death starting 96 hours after inoculation. Using reverse genetics, we inserted GFP-coding regions between the F and HN genes in the lentogenic NDVClone30 strain's genome which was named as rNDV-GFP. The recombinant NDV-GFP strains that produce GFP showed promising results for inhibiting growth of tumor cells. Our study paved the way for the use of recombinant NDV as an anticancer viral vector. Our results suggest that NDV-GFP is a promising therapeutic for glioblastoma cancer treatment.

There has been an increase in demand for nanocomposite, which has resulted in large-scale manufacturers employing high-energy processes and harmful solvents. Because of this, the need for environmentally benign "green" synthesis processes has grown. Other methods for making nanocomposite include using plants and plant products, bacteria, fungi, yeast, and algae. Green synthesis has minimal toxicity and is safe for human health and the environment compared to other processes, making it the ideal option for creating nanocomposite materials. This work reveals an environmentally friendly synthesis method for magnetic nanocomposites. In particular, they were using an aqueous extract of Artemisia to obtain ZnO/Fe3O4 using cold plasma technology. The magnetic nanocomposite was prepared with different concentrations (0.01, 0.02, and 0.03) of M and (2:8) of the aqueous extract. The structural properties were studied using X-ray diffraction, where the crystal size ranged from 30 to 40 nm, while the surface morphology was studied through the field emission scanning electron microscope, and it was found that the shape of the particles is semi-spherical and within a particle size range of 30 to 60 nm. "Green" magnetic nanocomposites showed low toxicity and high biocompatibility, allowing their application in biomedicine, where magnetic nanocomposites were employed as anti-agents for E. coli and S. aureus using the agar diffusion method. Its high effect on bacterial inhibition was noted when the concentration was increased, as the diameter of inhibition ranged (11-22) mm for E. coli and (15-24) mm for Staphylococcus aureus.

Antimicrobial resistance is considered a problem for public health globally. New forms of resistance mechanisms are developing and spreading daily around the world. For that reason, a potential method for overcoming the antimicrobial resistance of several pathogens that cause deadly infections is the use of silver nanoparticles. In the present study, silver nanoparticles (AgNPs) and AgNPs conjugated with lincomycin were synthesized and characterized. The antimicrobial activity of AgNPs alone and after conjugating with lincomycin was also evaluated. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to determine the morphological properties of AgNPs and AgNPs-lincomycin, which showed the average mean size was ±26.73 nm for AgNPs and ±28.31 nm for AgNPs-lincomycin with a spherical shape. In addition, the dynamic light scattering (DLS) and zeta potential were assessed. The results showed an improvement in the antimicrobial activity of lincomycin after conjugation with AgNPs, as the inhibition zone diameter reached 45.66±1.52 mm for Staphylococcus warneri, 17±2 mm for Serratia marcescens, and 22.33±1.52 mm for Candida guilliermondii. It also showed a synergistic effect of AgNPs-lincomycin against the biofilm formation of Candida guilliermondii, whereas Serratia marcescens was slightly affected. The MIC of AgNPs was 25 μg/ml for Staphylococcus warneri and Candida guilliermondii, whereas 100 μg/ml for Serratia marcescens, when the MIC of AgNPs-lincomycin was 12.5 μg/ml for Staphylococcus warneri and Candida guilliermondii, and 100 μg/ml for Serratia marcescens. In the experiment of the effect of AgNPs on gene expression of the antibiotic resistance genes, including the blaZ gene in Staphylococcus warneri, the aac(6´)-Ib-cr gene in Serratia marcescens, and the CDR1 gene in Candida guilliermondii, the results showed that there was a decrease in gene expression after being treated with AgNPs in each gene.

Silver nanoparticles (Ag-NPs) have unique properties as antibacterial effects against locally isolated clinical Escherichia coli. In this study, the evaluated the antibacterial activity of AgNPs, which were synthesized by laser ablation, against locally isolated clinical Escherichia coli on nutrient agar media in vitro. Then assessed the toxicity of the bactericidal dose in albino rats in vivo with hematological, liver, and kidney functions as vital parameters. AgNPs were synthesized by pulsed laser ablation in liquid (PLAL). AgNPs’ shape and nano size were characterized by atomic force microscopy (AFM), UV-vis spectroscopy, and scanning electron microscopy (SEM). UV peak absorption was observed at 434 nm, which produced an average particle diameter of 28.09 nm. The SEM and AFM topography images of the synthesized nanoparticles showed that they had a spherical shape. Also studied was the toxicity of the synthesized AgNPs in vivo. Four groups of albino rats were used. The liver and kidneys were found to be the main organs that accumulate AgNP. In this study, we examined the influence of intraperitoneally injected AgNPs on blood parameters (complete blood picture) and liver and kidney functions of albino rats. Blood ALP and serum test (GOT and GPT), serum urea and serum creatinine were analyzed at 15, 30, and 60 days after injection of 200 mg/kg of PLAL-synthesized AgNP. The results did not indicate statistically significant differences between the control and treatment groups in blood picture and enzyme levels tested that indicate proper liver function. Additionally, no differences in kidney functions were found during varying time intervals in the blood of rats. Thus, PLAL-synthesized AgNPs could inhibit Escherichia coli bacterial growth.

Thyroid carcinoma incidence is increasing yearly and ranks second among the top ten cancers in Iraq, especially among women. The single nucleotide polymorphism (rs965513, A>C) near FOXE1 gene was found to be associated with papillary thyroid carcinoma risk in several Genome-wide association studies. Therefore, this is a case-control study aimed at identifying whether this variation is associated with the risk of papillary thyroid carcinoma in the Iraqi population. Association of rs965513 was investigated in one hundred and one papillary thyroid carcinoma Iraqi patients and one hundred and two controls using quantitative PCR-high resolution melting technique. The results of genotype and allele frequencies showed that there is a strong association between rs965513 and papillary thyroid carcinoma. The allele C was significantly associated with the disease as a risk factor (P < 0.0003, odd ratio (OR): 2.1014, 95% confidence interval (CI): 1.3987-3.1570), while the allele A represents a protective factor (OR=0.4759). In conclusion, the allele C in rs965513 near FOXE1 gene is strongly associated with papillary thyroid carcinoma in the Iraqi population.

The study was aimed at inhibiting the protease produced by Pseudomonas aeruginosa using an 80% alcoholic extract of Conocarpus lancifolius leaves. A total of 146 isolates of P. aeruginosa that were isolated and identified by microscopic and biochemical tests were 51 isolates submitted to primary and secondary screening techniques in order to choose the qualified P. aeruginosa isolate for protease synthesis. Among these isolates, forty-seven isolates showed hydrolysis zones on skim milk media (primary screening); six isolates were chosen for secondary screening. The result revealed that P. aeruginosa P51 had the highest ability to produce the enzyme, with a specific activity of 15.9 U/mg protein. In addition, the study included extracting the leaves of C. lancifolius using 80% ethanolic alcohol and conducting the GC-MC assay and the HPLC assay of the plant extract. The results revealed a significantly decreased specific activity of protease from 15.9 to 1.2 U/mg
after treatment with 0.8 μg/ml of alcoholic extract of C. lancifolius leaves.

A hybrid cadmium sulfide nanoparticles (CdSNPs) electroluminescence (EL) device was fabricated by Phase – Segregated Method and characterized. It was fabricated as layers of (ITO/poly-TPD:CdS ) and (ITO/poly-TPD:CdS /Alq3). Poly-TPD is an excellent Hole Transport Layer (HTL), CdSNPs is an emitting layer and Alq3 as electron transport layer (ETL). The EL of Organic-Inorganic Light Emitting Diode (OILED) was studied at room temperature at 26V. This was achieved according to band-to-band transition in CdSNPs. From the I-V curve behavior, the addition of Alq3 layer decreased the transfer of electrons by about 250 times. The I-V behavior for (poly-TPD/CdS) is exponential with a maximum current of 4500 μA. While, the current is constant for (poly-TPD:CdS /Alq3) and the maximum current was 16.5 μA. Semiconductor nanoparticles like CdS are attractive for fabricating hybrid LEDs with spectrally pure color, low operating voltage values, and short-wavelength electro-luminescence, needed for the RGB devices. The correlated color temperature (CCT) was equal to (1700 oK) for the emitted blue light.

This study compares the effects of plasma jet and plasma-activated water on teeth root canals contaminated with Escherichia coli bacteria. A plasma jet system was developed for biological purposes that operate at atmospheric pressure. The plasma jet works with argon gas and is generated by a power supply, which supplies a sinusoidal alternating voltage of 12 kV of 20 kHz frequency. The system was optically diagnosed, as it was found that the peaks of the nitrogen spectrum were obtained at the wavelength (300- 450) nm with the appearance of hydroxide peaks at 380 nm. Extracted teeth with one root canal were used, which were contaminated with bacteria and divided into two groups to be treated with a plasma jet and plasma-activated water. The first group was treated with a plasma jet at a gas flow of 2.5 L/min with a change of treatment time from 0.5 to 3 minutes. The number of killed bacteria colonies increased when the exposure time increased (2.7×108 CFU per mL - 0), and the total killing of bacteria was obtained at 3 minutes treatment time. While the second group was treated with plasma-activated water; the water used to kill the bacteria was treated with plasma for one hour at a gas flow rate of 1 L/min. The measured concentrations of (NO2, NO3, and H2O2) of this water were (10, 100 and 200) ppm. The teeth were treated with plasma-activated water for different times that ranged between (5- 35) minutes. Different bacterial killing rates were obtained at these times, and the total bacterial killing rate was obtained for 35 minutes of treatment time. The obtained results found that the response of bacteria to treatment with plasma jet is better than treatment with plasma-activated water.

Manufacturing high-efficiency polymeric materials to moderate fast neutrons by converting them into slow or thermal neutrons. These materials absorb thermal neutrons as well as gamma rays associated with neutrons. Materials of small mass number are used to slow down fast neutrons because neutrons have a high cross-section when they interact with these materials. Materials of high mass number absorb gamma rays. Polyurethane and epoxy were mixed in various ratios to create a blend to serve as neutrons shield, lead (Pb) was then added to the blend at weight percentages of 20%, 30%, 40%, 50%, and 70% to produce a polymer composite.
Polymeric materials reinforced with lead in various ratios were tested to select the best composite. The Polymeric samples were placed between the neutron source and the detector, and changing their thickness from 1 cm to 10 cm in increments of 1 cm. The neutron count rate for five readings was recorded, and the average was taken. As a result, the relationship between count rate and sample thickness was plotted, the half-value thickness of the shield was determined, the relationship between the logarithm (????0????⁄) and the thickness was drawn, the removal cross-section (Σ????) was determined, as well as, the mean free path of the fast neutron, and these were compared for each sample. This work concluded that the sample containing 20% lead with a thickness of 10 cm and a diameter of 4 cm was the best shielding for absorbing fast neutrons.

Bai Hassan Oil field is considered one of the important north Iraq oil fields. The giant oil field of Bai-Hassan is located near Kirkuk City in North Iraq. The field consists of two domes (in SE – NW direction) Kithka Dome and Dauod Dome separated by a narrow saddle called Shashal saddle.
The current study is focused on microfacies analysis to interpret the stratigraphic sequence of the Palani Formation (early – lower Oligocene age), Baba, Bajawan and Tarjil Formations (middle Oligocene age).
The Bajawan Formation consists basically of five microfacies easily recognizable throughout the thin section. These microfacies are Lime Mudstone Microfacies, Miliolid Packestone Microfacies, Miliolid Grainstone Microfacies and Dolostone Microfacies. The Baba Formation comprises four microfacies: Rutalia - Nummulites Packstone Microfacies, Coral Boundstone Microfacies and Dolostone Microfacies. Two microfacies have been recognized in Tarjil Formation, these are Lime Mudstone Microfacies and Planktic foraminiferal packstone microfacies. In addition to two microfacies within Palani Formation are Lime Mudstone and Planktonic foraminifera Wackstone Microfacies.
The depositional environment of the studied formations and the analysis of their facies components showed that they were deposited within the three parts of the ramp environment, where the Palani Formation was deposited in the deeper part from the outer ramp during TST and HST stages, while the Tarjil Formation was deposited at the distal part of upper slope area from middle ramp environment during HST stage. The Baba Formation was deposited on the swelling parts of the approximal part for the middle ramp at the lower part (TST), and it was reached separately by MFS from the distal part of inner ramp sediments which were deposited during HST as two cycles. The Bajawan Formation with its two parts was deposited at the approximal part from the inner ramp environment during the early and late HST stage.

The 2D electrical resistivity imaging (ERI) is a non-destructive method with good efficiency to detect shallow subsurface features. The archeological subsurface features were investigated with this method in most cases with the assistance of other methods such as GPR method. Eleven 2D ERI profiles were carried out to investigate the subsurface archeological features in the Kish site in the Babylon area. The 2D electrical resistivity survey was achieved with ABEM Terrameter-LS2 Device and 30 electrodes with 1-meter spacing between the adjacent electrodes along each profile. The length of the profile is 29 meters and the spacing between the adjacent profiles is 3 meters. The software RES2DINV was used to obtain the final inverted models. The resistivity value of the study site is low, not exceeding 10 ohm.m. The variation in the resistivity anomalies values indicates many possible buried walls on the site. The clearest anomaly, which shows relatively high resistivity at the distance range of 8-11 m, appeared in all profiles nearly at the same position and extended in depth from 0.25-4 meters. This anomaly is interpreted as an ancient wall. Profiles 1, 5, and 10 to check the resistivity result. The GPR survey result generally confirms the resistivity result. The 2D ERI and GPR methods successfully detect the buried wall in the study site.

Understanding sedimentation behavior and its transport capacity in the Tigris River is of significant importance owing to the detrimental consequences caused by it. This study investigates the sediment amounts transported along the reach of the Tigris River in Baghdad. The CCHE2D model which is a common tool developed by the National Center for Computational Hydrological Science and Engineering (NCCHE) was applied to investigate the flow pattern and sediment amounts within 7 km reach. The model was initially calibrated and validated under steady-state conditions at the Sarai gauging station (upstream) and its performance was evaluated around the Abu Nawas water treatment plant (downstream). The result shows that the water surface level and velocity in the Sarai Baghdad gauging station and Abu Nawas raw water station cross-sections are different due to different considerations which are discharged, bank and bed soil types, channel velocity, and section shape. Moreover, the sediment concentrations ranged between 0.240 - 0.350 kg/m3 at the cross-section of the Sarai Baghdad gauging station while the cross-section of Abu Nawas raw water station ranged between (0.040-0.090) kg/m3. Additionally, the study investigated the
average suspended sediment concentration at the river reach which ranged from 150 to 300 kg/m3. Finally, the study demonstrated CCHE2D's capacity to simulate river flow and sediment movement.

This study involves microfacies analysis of the Kometan Formation from northeastern Iraq supported by detailed petrographic investigation for the main components and diagenetic processes using a petrographic microscope, scanning electron microscope (SEM), and X-Ray diffraction (XRD). The techniques have revealed that the formation includes two microfacies; lime wackestone and lime packstone microfacies which in turn are subdivided into seven sub-microfacies, that were deposited in the quiet and deep marine environment. Planktonic foraminifera (keeled and globular chamber types) are dominant, along with oligostegina in addition to subordinate benthonic foraminifera and fine-grained bioclasts. Calcite forms the main mineralogical composition in euhedral (rhombohedral), microcrystals, star-shaped, and columnar crystals in addition to pyrite and glauconite. All components are embedded in the micritic groundmass. The main diagenetic processes affecting the studied rocks include; chemical compaction (stylolite formation), dissolution, recrystallization, and cementation.

Trace elements (Co, Cr, Mn, Mo, Ni, Rb, Th, U, and V) in surface soil of Al-Aslah (NH1), Nasiriyah refinery (NH2), Gharraf (NH3), and Tall Al-Laham (NH4) at Thi-Qar governorate, southeast Iraq, were studied. The study aims to detect their distribution and pollution levels to reduce the subtracted from industrial sources and avoid using contaminated areas for agricultural purposes before the soil treatment process. Inductivity Coupled Plasma Mass Spectrometry (ICP-MS) technique was used to determine the concentrations of these elements, and the results showed that there is a high concentration of Cr, Ni, Mo, and Mn in the soil of the study area, which exceeded the international levels compared with other elements (Co, Th, U, and V). The Geo accumulation index (I geo) values showed that the soil area was classified as low contamination in all sites and for all trace elements except for Mo, which is polluted in Al-Gharraf and strongly polluted in Tall Al-Laham. The values of the enrichment factor (EF) were indicated to be minimal enrichment of (Mn and V) in all sites and moderate enrichment of (Co) in all sites except in the Gharraf soil sample, which is considered as minimal enrichment. At the same time, it suffers from significant enrichment of (Cr) in all sites. The values of contamination factor (CF) showed extreme contamination of Cr and Ni in all sites due to the oil industry (Nasiriyah refinery), except for Ni in the Gharraf soil sample, which is considered as high contamination and moderately contamination with Co in all sites, and low contamination with Mn and V. The main cause of the increasing trace element concentrations in the study area that the samples located in industrial sites where trace elements are one of the waste products from fuel combustion from the oil fields and the waste of the brick factories near the study area, also the nature of the study area soil which is clay soil that absorb the trace elements on its surfaces.

The dynamical behavior of an ecological system of two predators-one prey updated with incorporating prey refuge and Beddington –De Angelis functional response had been studied in this work, The essential mathematical features of the present model have been studied thoroughly. The system has local and global stability when certain conditions are met. had been proved respectively. Further, the system has no saddle node bifurcation but transcritical bifurcation and Pitchfork bifurcation are satisfied while the Hopf bifurcation does not occur. Numerical illustrations are performed to validate the model's applicability under consideration. Finally, the results are included in the form of points in agreement with the obtained numerical results.

In this article, we investigate a mathematical fractional model of tuberculosis that takes into account vaccination as a possible way to treat the disease. We use an in-host tuberculosis fractional model that shows how Macrophages and Mycobacterium tuberculosis interact to knowledge of how vaccination treatments affect macrophages that have not been infected. The existence of optimal control is proven. The Hamiltonian function and the maximum principle of the Pontryagin are used to describe the optimal control. In addition, we use the theory of optimal control to develop an algorithm that leads to choosing the best vaccination plan. The best numerical solutions have been discovered using the forward and backward fractional Euler method.

In this article, we investigate the heat transfer on nanoparticles Jeffrey Hamel flow problem between two rigid plane walls. Water is used as a main fluid using four different types of nanoparticles, namely aluminum, cuprous, titanium, and silver. The results of nonlinear transformational equations with boundary conditions are solved analytically and numerically. The perturbation iteration scheme (PIS) is used for the analytic solution, while for determining the numerical results, the Rang-Kutta of the four-order scheme (RK4S) is used. The effects on the behavior of non-dimensional velocity and temperature distributions are presented in the form of tables and graphs for different values of emerging physical parameters (Reynolds number, Prandtl number, Eckert number and open angles).The solid component of nanoparticles has an influence on the heat transfer and flow characteristics that is more visible when compared to other types of particles. The temperature distribution increases with the increase of the Reynolds number, Bruntel number, Eckert number, but the velocity distribution decreases with the increase of the Reynolds number. Finally, the obtained findings demonstrate PIS efficacy, accuracy, and convenience in solving the problem of nanofluid flow.

In this article, we investigate the peristaltic flow of a Powell-Eyring fluid flowing in an asymmetrical channel with an inclining magnetic field through a porous medium, and we focus on the impact that varying rotation has on this flow. Long wavelength and low Reynolds number are assumed, where the perturbation approach is used to solve the nonlinear governing equations in the Cartesian coordinate system to produce series solutions. Distributions of velocity and pressure gradients are expressed mathematically. The effect of these parameters is discussed and illustrated graphically through the set of figures. To get these numerical results, we used the math program MATHEMATICA

The time fractional order differential equations are fundamental tools that are used for modeling neuronal dynamics. These equations are obtained by substituting the time derivative of order ????, where 0