Ibn Al-Haitham Journal For Pure and Applied Sciences

The current study was applied in Al-Zafaraniya area southeast of the capital Baghdad from October 2021 to April 2022. This is to evaluatesome heavy elements (Cd, Co, Cu, Fe, Pb, and Mn) in the street, storm, and suspended dust. Four sampling sites were selected, and codes A, B, C, and D were given to represent the industrial activity sites, service workshops, business activity, and residential areas.The results showed that the concentration rates of elements (Cd, Co, Cu, Fe, Pb, Mn) in street dust samples were (1.15, 6.6, 60.15, 26770, 44.4, 6, 489.8). In storm dust (2, 10, 49.3, 54760, 24.3, 827.2) ppm, respectively, the results of suspended dust revealed that the general rates of element concentrations were (0.707, 3.546, 3.727, 83.204, 1.076, 8.706) μg/m3, respectively. The results also showed the frequency of the appearance of the same elements and different concentrations in the three types of dust. They also indicate that each other interacted in increasing and continuing to expose the city atmosphere to the air loaded with hazardous metals to the health of human society and the components of the city's ecosystem.It can also be concluded from the values and variations of the elements that there are several environmental factors, such as temperature, humidity, air currents, local and regional storm surges, and irregular distribution of vegetation, can be attributed to the main reason in the deference values of heavy elements and their presence in the street, storm and suspended dust.

Allergic Rhinitis (AR) is a chronic immune system inflammation that occurs when the body overreacts to antigens in the environment (triggers) and produces a variety of symptoms in the nasal mucosa and paranasal sinuses due to the release of many interleukins and cytokines.We investigated the influence of the allergen on serum levels of TNF-α and Total IgE in patients with AR and their function in initiating allergic rhinitis in Iraqi petrol station workers in Baghdad. One hundred individuals with allergic rhinitis and thirty healthy workers between the ages of 20 and 59 were examined. For immunological testing, sandwich ELISA was used to evaluate serum levels of TNF-α and Total IgE. A complete blood cell count (CBC) was used for hematological testing. Findings showed a positive connection between TNF-α and Total IgE, with a correlation of (r=0.32). The TNF-α binary logistic regression analysis (BLR) was conducted to be highly significant (B = 0.02, OR = 1.02, p =0.065), viewing that an increase of one unit in TNF-α increases the odds of belonging to the AR group. TNF-α had the highest area under the curve (AUC) compared to other markers, with a value of (AUC = 0.995), indicating that it is an excellent predictor and strong marker for AR, with a sensitivity and specificity of 94% and 100%, respectively. After our research, we reached the significance of the study from the clarity of the role of tumor necrosis factor-alpha in the disease and its development and the coincidence of its increase with immunoglobulin E and considering. It is also a diagnostic marker of the disease.

The current study was conducted to test the efficiency of the vegetative part (plant leaves) of plant species of shrubs and trees involved in forming semi-artificial vegetation in the city of Baghdad, Karkh, in the uptake and accumulating the lead element that pollutes the air in the city atmosphere. Five plant sampling sites were selected: Al-Kadhimiyah, Al-Mansour, Al-Ma'aml (Al-Salam district), Al-Adl, and Al-Ameriya district intersections (Al-Seklat), and symbols were given (A, B, C, D, E) respectively.The spread and distribution of plants vary in terms of human activities and pollution levels, affecting the five sites that recorded more than 20 species. For a real comparison between plant efficiency and the effect of the nature of the region, species of recurrent and non-recurring shrubs and trees were selected in their presence at the study sites and included (Conocarpus lancifolius, Ziziphus spina christi, Eucalyptus sp., Albizia lebbeck), and non-recurring (Nerium oleander, Dodonaea viscosa, Phoenix dactylifera, Olea europaea, Myrtus communis, Ficus nitida, Citrus aurantium). The study's results showed a variation in the ability of plant species in lead accumulators. The first site of the plants (Conocarpus lancifolius, Ziziphus spina christi, Albizialebbeck, Eucalyptus sp., Nerium oleander, Dodonaea viscosa, Phoenix dactylifera, Olea europaea, Myrtus communis, Ficus nitida, and Citrus aurantium) was recorded at (0.46, 0.56, 0.36, 0.55, -, 0.68, -, -, 0.33, 0.29, 0.84) respectively. The second site ofthe same plants was (0.74, below the detection limit, 0.25, 0.57, -, -, 0.16, -, -, 0.31, -) respectively. The third site was (0.95, 0.65, 0.832, 0.831, 0.86, 1.02, -, -, -, 0.436, -, 0.532), respectively. The fourth site was (0.34, 0.95, 0.48, 0.40, -, 0.19, -, -, -, -), respectively. The fifth site was (0.48, 0.50, 0.49, 0.41, -, -, -, 1.45, -, -, -, -) ppm, respectively. The current study was conducted from October 2021 to May 2022.

The present study aimed to examine the effect of endosulfan insecticide on some molecular and biochemical parameters in white mice. Thirty mice were separated randomly into three groups for treatment with endosulfan. One group (G1) served as the control, while the other two groups received intraperitoneal injections of endosulfan G2 (3 mg/kg) and G3 (17 mg/kg) twice a week for 21 and 45 days, respectively. A biochemical study by measuring liver function parameters, including (alanine aminotransferase (ALT)and aspartate aminotransferase (AST)) and kidney function parameters, including (Blood Urea and Creatinine) and malondialdehyde (MDA), catalase activity (CAT). This study also tested DNA damage by comet assay (normal%, low%, medium%, high%). The results of renal function parameters (Blood Urea and Creatinine) were significantly increased in all treated groups after 21 and 45 days exposed to endosulfan compared with control groups. The highest value of blood urea recorded was (49.33 ±0.88 mg/dl) at 17 mg/kgfor 45 days compared with the control group, and the highest value of Creatinine recorded was (1.81 ±0.13 mg/dl) at 17 mg/kg for 45 days compared with the control group. Liver function parameters (ALT and AST) significantly increased in all treated groupscompared with control groups. The results of MDA, CAT enzyme, were significantly increased in all treated groups after 21 and 45 days compared with control groups. The highest value of MDA recorded was (3.93 ±0.07 μM) at 17 mg/kg for 45 days compared withthe control group. Tail DNA (%) showed a significant increase at high concentrations, and the results showed a considerable increase in the severe damage of DNA in the treated group 17 mg\kg b.wt. (25.00 ±1.00)% for 45 days, compared with the control group (3.00 ±1.00) %.

This study presented the first recorded of the banded garden spider Argiope trifasciataand described for the first time in Baghdad city, Iraq. The specimens were collected from Al-Rashidiya sub-district north of Baghdad city on 26/ November/ 2021 (7:00 am-6:00 pm) from fruit gardens (orange and apricot trees) and agriculture lands (palm trees, crops of wheat and vegetables). The spider "Argiope trifasciata" species is a member of the orb-weaving spider genus. It belongs to the Araniedae family, widespread worldwide, and has four pairs of long legs covered with spines and eight eyes arranged in two rows. The females of Argiope trifasciataspiders are yellow and covered with silvery and shiny hairs on the carapace that are relatively low. The abdomen of described spider is usually oval and elongated with pale yellow and black stripes. The legs are yellowish brown with dark rings.

The study is designed to evaluate the effect of the aqueous extract of the P. lanceolata plant, as well as to know the effect of the drug CCl4on the formation of micronucleus in vivo48 female albino mice. In the study mice were separated into eight groups treated intraperitoneally for seven day first group Negative control, second positive control( CCl4 0.02%), third group aqueous extract (250 mg/kg), fourth group aqueous extract (500 mg/kg), fifth group (CCl4 0.02%) plus aqueous extract (250 mg/kg), sixth group (CCl4 0.02%) plus aqueous extract (500 mg/kg), seventh group aqueous extract (250 mg/kg) plus (CCl4 0.02%), and eighth group aqueous extract (500 mg/kg) plus (CCl4 0.02%). The genetic-cellular aspect involved measuring the coefficient of micronucleus formation in bone marrow cells in mice treated with CCl4and plant aqueous extract. The results showed that the treatment of mice with the drug led to a rise in the coefficient of micronucleus formation compared to the negative control group. In addition, it showed the plant's ability to reduce the drug CCl4effect in the totals of overlaps between the plant extract and the drug at the concentrations used for the plant 250 and 500 μg/ml and reduce the formation of micronucleus.The cellular toxicity of the plant’s aqueous extract on the liver cancer cell line was assessed in HepG2 (liver cancer cell line) and the WRL68 (hepatic human cell line) using concentrations (25, 50, 100, 200, and 400 μg /ml) from the plant’s aqueous extract on the HepG2 liver cancer cell line. The results showed a decrease in cell viability depending onaqueous extractconcentration. The vitality of cancer cells decreased with the increase in concentration; the viability of the aqueous extract of the plant on cancer cells reached the minimum at concentration 400 μg/ml 45.34±4.44, while it reached the maximum when concentration 25 μg/ml 84.53±2.41.

This study was carried out to determine the effects of crude terpenoid compound extracts ofMelia azedarachL. leaves and fruits on some biological aspects of whiteflyBemisia tabaci(Genn.) under laboratory conditions of 25 ± 2°C and relative humidity of 65-70%. The results indicated a significant effect on eggs and immature stages when treated with 0.5, 1, 1.5, and 2 mg/ml of leaves and fruits. The mortality rate increased with concentration. It reached 98.68, 100, 100, 95.70, 86.30, and 42.68% for eggs, 1st, 2nd, and 3rd nymphal instars, pupa, and adults, respectively, at a concentration of 2 mg/ml for leaves extract. At the same time, it reached 94.86, 100,100, 100, 87.89, and 44.90% for eggs, 1st, 2nd, and 3rd nymphal instars, pupa, and adults, respectively, at a concentration of 2 mg/ml for fruit extract. Also, the proportion of adults who emerged from sprayed eggs reduced to 91.53% and 95.72% when treated with 2 mg/ml of leaves and fruit extracts, respectively. While the developmental period increased to 23.50 and 24.00 days at 2 mg/ml when treated with terpenoid extracts of the leaves and fruits, respectively, compared with 21.00 and 20.83 days at control.

Phytoplankton community is a model for of monitoring aquatic systems and interpreting the environmental change in aquatic systems. The present study aimed to forecast environmental parameters that drive the change of phytoplankton community structure in the lake. The present study was carried out in Baghdad Tourist Island Lake (BTIL) for the period From October 2021 to May 2022. The study included the quality and quantity of phytoplankton, moreover, the highest and lowest value of the physical and chemical parameters were (Water temperature (13-30 °C), Light penetration (94-275cm), electric conductivity (837-1128 μS/cm), salinity (0.5-0.7 ‰), pH (7-8.2), total alkalinity (126-226 mg CaCO3/L), total Hardness (297-395 mg CaCO3/L), Calcium (62-98 mg/L), Magnesium (59-75mg/L), Sodium (45-77 mg/L), Potassium (4-9 mg/L), dissolved oxygen (6-9 mg/L), total dissolved solids (586-777 mg/L), total phosphorus (0.1-0.7 mg/L), total nitrogen (0.2-3 mg/L). Monthly samples were taken from the subsurface water from three sampling sites in the Lake and the results and presented as dry and wet seasons. A total of 127 algal taxa was identified in the dry and wet seasons with the dominancy of diatoms (Nitzschia,Gomphonema, Navicula, Ulnaria) and followed by Cyanophyceae (Oscillatoria, Merismopedia) and Chlorophyceae (Cladophora), while Dinophyceae (Ceratium, Gymnodinium), and Euglenophyceae (Euglena) were uncommon. The lowest total cell number of phytoplankton was 221cell*104/L in the first site during the wet season, while the highest total cell number of phytoplankton was recorded at the third site with 323×104cells/L in the dry season. The Canonical Correspondence Analysis (CCA) showed the impact of environmental parameters on phytoplankton community structure. Therefore, the changes in phytoplankton species were noticed in the present study in comparison with previous periods and this finding is a warning of alteration in the environmental condition of the lake.

To fabricate an inexpensive surface coating with excellent mechanical properties with good water resistance and thermal diffusion, white eggshell fibers with particle size (~1micrometer) has been added by different weight percentages (1,2,3,4,5,6,7 and 8 %) to Unsaturated Polyester. The weight ratio (4%) of eggshell powder is a good ratio to be added to polyester to improve its mechanical properties, such as hardness, impact strength, and wear resistance. The hardness was improved by (3.75%); impact strength has the same value as polyester, flexural strength by (8.43%) and high improvement in wear resistance (74.4%)., as well as to get further improvementsin mechanical properties of polyester,the eggshell powder was added with (5%), where the hardness was improved by (3.63%), impact strength improved by (~23%) and the flexural strength by (23.23%)but the wear resistance by (2.15%) only . The resistance to thermal of polyester was improved to (9.95%) and (13.77%) by adding the eggshell powder with ratios (of 4%) and (5%), respectively.(Polyester/ 4% eggshells). And (Polyester/ 5% eggshells) composites have a higher resistance to water diffusion after being immersed in water between (1-4 weeks). The electron microscope image was used to observe the degree of homogeneity in polyester composite microstructure, which improved the results mechanical and thermal results.doi.org/10.30526/36.1.2889Article history: Received16June2022, Accepted 21Augest2022, Published in January2023.Ibn Al-Haitham Journal for Pure and Applied SciencesJournal homepage: jih.uobaghdad.edu.iqAveenansaifjassimDepartment of Phesics,College of Education for Pure Sciences, Ibn Al –Haitham, University of Baghdad,Baghdad,Iraq.Aveen.Ansaif1204a@ihcoedu.uobaghdad.edu.iqWidadhamdiJassimDepartment of Phesics,College of Educationfor Pure Sciences, Ibn Al –Haitham, University of Baghdad,Baghdad,Iraq.widad.h.j@ihcoedu.uobaghdad.edu.iq

Sawa Lake is one of the unique lakes in Iraq. It is located in the southwestern part of Iraq. It is one of the closed lakes, as no surface water source works to feed the lake. The lake feeds on groundwater. The source of this groundwater is the Dammam Basin. During the past ten years, The lake has had many changes, which led to a decrease in water levels. This also led attention to study of the causes of these changes. Many types of research were presented in the study of the state of the lake. This research used remote sensing images from Landsat 8 OLI to monitor the changes during 2020-2021 by applying the NDWI equation to extract water area from image data. The results of the areas were obtained from a special report by Normalized Difference Water Index (NDWI). Then, the lake surface water temperature was derived from Landsat 8 thermal bands (TIRS). The lake water area and temperatures increased in summer and decreased in winter and autumn. Then, it is not the main reason for the change in the lake water area. The levels of the lake water rise during the dry period and decrease during the rainy period. The natural factors have little influence in reducing the lake water. It is attributed to human factors, groundwater depletion, and a reduction in water supply from the Dammam Basin, which feeds the lake.

In this research, a group of gray texture images of the Brodatz database was studied by building the features database of the images using the gray level co-occurrence matrix (GLCM), where the distance between the pixels was one unit and for four angles (0, 45, 90, 135). The k-means classifier was used to classify the images into a group of classes, starting from two to eight classes, and for all angles used in the co-occurrence matrix. The distribution of the images on the classes was compared by comparing every two methods (projection of one class onto another where the distribution of images was uneven, with one category being the dominant one. The classification results were studied for all cases using the confusion matrix between every Two cases or two steps (two different angles and for the same number of classes). The agreement percentage between the classification results and the various methods was calculated.

X-ray diffractometers deliver the best quality diffraction data while being easy to use and adaptable to various applications. When X-ray photons strike electrons in materials, the incident photons scatter in a direction different from the incident beam;if the scattered beams do not change in wavelength, this is known as elastic scattering, which causes amplitude and intensity diffraction, leading to constructive interference. When the incident beam gives some of its energy to the electrons, the scattered beam's wavelength differs from the incident beam's wavelength, causing inelastic scattering, which leads to destructive interference and zero-intensity diffraction. In this study, The modified size-strain plot method was used to examine the pattern of x-ray diffraction lines (101),(121),(202),(042), and(242) for calcium titanate(CaTiO3) nanoparticles in this study. To calculate the new variables, the size strain plot method was created., X-ray line analysis and calculation of crystal size and lattice tension of calcium titanate oxide nanoparticles. It is used to calculate the crystal volume (44.7 nm) and to calculate the determination of network parameters such as the texture modulus (Tc), macro stress (MS), specific surface area (SSA), and dislocation density(η), respectively.

The study consists of video clips of all cars parked in the selected area. The studied camera height is1.5 m, and the video clips are 18video clips. Images are extracted from the video clip to be used for training data for the cascade method. Cascade classification is used to detect license plates after the training step. Viola-jones algorithm was applied to the output of the cascade data for camera height (1.5m). The accuracy was calculated for all data with different weather conditions and local time recoding in two ways. The first used the detection of the car plate based on the video clip, and the accuracy was 100%. The second is using the clipped images stored in the positive file, based on the training file (XML file), where the accuracy was 99.8%.

The use of bio-fruit waste has more attention in recent years because of the low cost of bio-fibers and the protection of the environment. In this study, the epoxy was reinforced with fruit residues (cantaloupe peel powder) in proportions (1%, 2%, 3%, 4%, 5%, 7.5%, and 10% by weight) as results of mechanical tests such as impact, hardness, flexural and compression.Adding sub microns particle size cantaloupe peels particles with a weight ratio of 7.5% improves the epoxy mechanical properties, like impact strength, hardness, flexural strength, and compression strength by 59.43%, 5.8%, 45.7%, and 118.2%, respectively. Using X-ray diffraction, the crystallite size ( D) of cantaloupe peel the powder was about (3 nm).In this research, Scanning electron microscopy was used to examine the morphology of the (epoxy/7.5 % cantaloupe peel powder) composite and to interpret the improvement in epoxy mechanical properties.

This research calculated the effect of partial replacement of Trillium with tin by weight ratios x=0, 5, 10, 15, and 20 of the weight of manufactured samples on the thermal conductivity coefficient of Se60Te40-xSnx chalcogenide glasses. The thermal conductivity coefficient of the samples was calculated using a disk- Lee. The results showed that increasing the concentration of tin improves the thermal insulation ability by decreasing the thermal conductivity value and then determining the optimal weight ratios at which a large thermal insulation is obtained.


The electrical resistivity as a function of temperature was studied. The electrical resistivity (rd.c) was calculated as a function of temperature for all samples, using two-point probe techniques in the dark electrical resistivity measurements of Se60Te40-xSnx glasses for all values made in the temperature range 303-455 K. The electrical resistivity was found that it depends on the change in Tin addition, the temperature is clearly affected by the increase in the concentration of tin in the alloy. The electrical resistance increases when the concentration of Tin increase of Se60Te40-xSnx

In this study, the Earth's surface was studied in RazzazaLake for 25 years, using remote sensing methods. Images of the satellites Landsat 5 (TM) and 8 (OLI) were used to study and determine the components of the land cover. The study covered the years 1995-2021 with an interval of 5 years, as this region is uninhabited, so the change in the land cover is slow. The land cover was divided into three main classes and seven subclasses and classified using the maximum likelihood classifier with the help of training sets collected to represent the classes that made up the land cover. The changes detected in the land cover were studied by considering 1995 as a reference year. It was found that there was a significant reduction in the water mass that made up the lake and its transformation into arid land. The vegetationcover was characterized by the relative stability of the crop class. Its constant percent ranged 60% to 80%, unlike the natural plant class, which fluctuates due to its dependence on environmental factors, which is characterized by change. The Kaju presence of continuous change between soil subclasses was due to the different environments affecting the study area. The most affected class was the shallow water class, which disappeared as a result of the drought experienced by the lake.

n the present work, a first-row divalentd-transition metal obtained from curcumin(Curc) and L-3,4-dihydroxyphenylalanin(L-dopa)have been synthesized which their complexes and characterized by C.H.N, conductance, spectral methods: FT-IR, Ultra–Visible.Magneto-chemical measurements,molar conductanceΛM (1×10−3mol/L in DMSO):36-0.84ohm-1.cm2.mol-1(non-electrolyte).The data shows that the complexes have the structure [M((II))-(Curc)-(L-dopa)] system. Electronic and magnetic data suggest an octahedral geometry for allcomplexes in which the (L-dopa) and curcuminact as bidentate ligands.Curcumincoordinatedtothe metal ions M (II) through the lone pair of electrons of oxygen in 2(C=O) groups.The (L-dopa) coordinated to M (II) asa mono negative bidentate ligand through the oxygen atom of the carboxylate and the (N),atom of the (-NH2) groups.The general formula was given for the prepared mixed ligand complexesas[M (Cur)(L-dopa)2]. M= Mn (II), Fe (II),Co(II),Ni(II),Cu (II), Zn(II), Cd(II) and Hg(II).The ligands andtheir metal complexes were screened for their antimicrobial activity klebsiella pneumonie,andStaphylococcus aureus,and Candida albicans. Metal chelates showed very good antimicrobial activity than their parent curcumin-and (L-dopa).

The performance of drug treatment and assessments of different drugs' side effects both can be affected by the interaction between food additives and drugs. Organic compounds such as food colorants dyes are utilized as additives in a wide range of foods. In this study, the adsorption interaction behavior between the colorant food dye sunset yellow (SY) and the drug loratadine was examined. The adsorption procedure is conducted at different drug dosages, various SY dye concentrations, and different temperature (288-318K). The equilibrium data were explained by using Freundlich and Langmuir adsorption isotherms, but Langmuir offering the best fit model. Kinetics adsorptive behavior of sunset yellow on loratadine matched pseudo-second order kinetics. Thermodynamics study show that the process is exothermic, spontaneous and the disorder at the solid-solution interface was proven from the negative entropy (-140.556 J/ K.mol)of adsorption process.

The role of residues in the adsorption process for removing contaminants from their aqueous solution was highlighted in this study. The adsorption capacity of eggshells were used to remove the methyl orange dye from its aqueous solution. The highest dye adsorption was found to range between (62.30% to 62.33%). The results of using adsorption isotherms (Freundlich, Langmuir, and Temkin) have been revealed that the Freundlich model was followed and that the Langmuir model did not match, as well as the partial applicability of Temkin's model at temperatures (298,308,318) K. The process of adsorption is a physical one. Three kinetic models of the adsorption process were also used, with the results demonstrating the applicability of the pseudo-second-order model. In this study, the thermodynamic functions were estimated using the value of the enthalpy ΔH°, which was negative and equal to (-4.7685 KJ/mole), The process was discovered to be exothermic, and the entropy ΔS° value was also negative, equaling (- 11.5100 J/mole.K), indicating a decrease in the randomness of adsorption when added to the Gibbs free energy ΔG°, indicating that the reaction occurred spontaneously.

This study describes the preparation of tetradentate Schiff base derived from the condensation of 2-Hydroxy naphthaldehyde with 2-amine benzhydrazide and the synthesis of new complexes series with a good yield.The prepared ligand was characterized using a microanalysis technique, UV-visible, FT-IR, nuclear magnetic resonance 1H-NMR, mass spectrometry, thermal gravimetric analysis TGA, and the addition of conductivity measurement and magnetic moment of complexes. The invitro antimicrobial activity of the prepared compounds was tested against Gram-negative Klebsiella pneumonia, Gram-positive Staphylococcus aureu, and Candida albicans by the agar well diffusion method. The spectroscopy and measurement studies showed that the ligand coordinated with the metal ion as a tetradentate ligand via oxygen and nitrogen, forming an octahedral geometry around it. The ligand and its complexes positively affect the studied microorganisms' Gram-positive and Gram-negative strains and fungi.

Diabetes mellitus is a set of metabolic diseases, the most prevalent of which is chronic hyperglycemia. The culprits include insulin synthesis, insulin action, or both. Osteoporosis is a progressive systemic skeletal disorder defined by decreased bone mass and micro architectural degeneration of bone tissue, resulting in increased bone fragility and fracture risk, according to the World Health Organization (WHO). The degree of Nervosa damage determines how much a diabetic patient's body has been compromised. The current study's goal is an estimation: Age, BMI, FBS, HbA1C, D3, ALP, Ca, P, and Osteocalcin in Iraqi T2DM Women's patients with and without Osteoporosis. Three vitamins are required for Osteocalcin biosynthesis: vitamin K for Gla formation, vitamin C for hydroxylation of Pro-9 to hydroxyproline, and vitamin D for Osteocalcin production stimulation. Vitamin D is known to function in calcium homeostasis and bone metabolism.
Osteocalcin is a hormone produced by osteoblasts and secreted into the extracellular matrix of bone and the bloodstream. It serves as a biological marker for bone formation. The work was classified into three groups. G1 (n= 40) is the control set that went to the Iraqi Ministry of Health's Endocrinology and Diabetes Center in Baghdad. G2 (n= 40) are patients with type 2 diabetes mellitus without Osteoporosis who visited the Endocrinology and Diabetes Center of the Iraqi Ministry of Health in Baghdad, and G3 (n= 40) are patients with type 2 diabetes Mellitus with Osteoporosis.

Peripheral neuropathy represents one of the common diabetic complications in patients with diabetes mellitus type 2 (DMT2). Peripheral neuropathy affects the feet, legs, hands, and arms. It was found that one-third to one-half of diabetics have peripheral neuropathy. The current study aimed to evaluate the level of visfatin in diabetic patient groups with or without peripheral neuropathy in comparison with healthy subjects to knowledge whether visfatin can be applied as a predictor factor for this type of disease complication. The study included 120 males and females ranging in age from 40 to 97 years old. (40 patients with type 2 diabetes, 40 patients with diabetic peripheral neuropathy, and 40 healthy people served as the control group.) All of the diabetes patients had a verified diagnosis (type 2). During the period from October 2021 to December 2021, the patients were assessed at the National Diabetes Center, Al-Mustansiriya University in Baghdad. Visfatin levels were tested using the ELISA technique, and HbA1c was assessed using Cobas C111. In patients, HbA1C levels are significantly higher (p≤0.05) than in controls. Males and females with DPN and DM have greater Visfatin mean values than the control group. Visfatin levels are strong indications for early diagnosis of diabetic neuropathy in both males and females, according to the current study.

Green nanotechnology is a thrilling and rising place of technology and generation that bracesthe ideas of inexperienced chemistry with ability advantages for sustainability, protection, andthe general protection from the race human. The inexperienced chemistry method introduces aproper technique for the production, processing, and alertness of much less dangerous chemicalsubstances to lessen threats to human fitness and the environment.The technique calls for in-intensity expertise of the uncooked materials, particularly in phrases in their creation intonanomaterials and the resultant bioactivities that pose veryfew dangerous outcomes for peopleand the environment.In the twenty-first century, nanotechnology has become a systematicbreakthrough. Metallic nanoparticles (steel or steel oxide nanoparticles) have attracted loads ofhobbies because of their different physiological, technological, and chemical The biologicaltechnique is popular because it produces green nanoparticles in an environmentally friendly,simple, easy, quick, and cost-effective manner. Amino acid phenolic, flavonoids, terpenoids,and proteins are examples of reduced and oxidizing agents. Agents of stabilization, synthesisusing plants, on the other hand, was already being debated., basics of green synthesis techniquesexploredinthisstudywithanemphasisonmetalsormetaloxides(ZnO,AgO,andTiO2),terpenoidsaswellasproteins,whichcanoperateaschemicalreducingandoxidizingagents,aswellasstabilizationandofagents.Greensynthesisusingplants,,isstillbeingdebated.

A new Mannich base ligand was prepared by reacting the 2-chloro.-N-(5-mercapto-1, 3, 4-thiadazol -2-yl) acetamide and Piperidine in the presence (formaldehyde) (L) ligand. A series of ligand complexes were prepared from (L) with the metal ion Co (II), Ni (II), Cu (II), Pd (II), Pt (IV), and Au (III). Various spectroscopic techniques such as C.H.N.S, FTIR, UV-VIS, , 1HNMR, 13CNMR, Magnetic moment, and molar conductivity successfully characterize the obtained compounds. The M: L ratio was determined using the molar ratio method in solution. All prepared compounds' antibacterial and antifungal activity was studied against two types of bacteria and one type of fungi at a rate of 0.02M. The standard ΔH° f and ΔEb of the ligands and all the prepared complexes were calculated using Hyperchem 8.0.7 program, and the study proved that the complexes are more stable than the ligands. In addition, the vibrational frequencies of the ligand were calculated, and the theoretical error rate of the process was calculated.

The reliability of the stress-strength model attracted many statisticians forseveral years owing to its applicability in different and diverse parts such as engineering, quality control, and economics. In this paper, the system reliability estimation in the stress-strength model containing Kth parallel components will be offered by four types of shrinkage methods (Constant Shrinkage Estimation Method, Shrinkage Function Estimator, Modified Thompson Type Shrinkage Estimator, Squared Shrinkage Estimator). The Monte Carlo simulation study is compared among proposed estimatorsusing the mean squared error. The result analyses of the shrinkage estimation methods showed that the shrinkage functions estimator was the best since it has a minor mean squared error than the other methods followed by the additional shrinkage estimator. The stress and strength belong to the Inverse Kumaraswamy distribution.

Antimagic labeling of a graph ????with ????vertices and ????edges is assigned the labels for its edges by some integers from the set {1,2,...,????}, such that no two edges received the same label, and the weights of vertices of a graph ????are pairwise distinct. Where the vertex-weights of a vertex ????under this labeling is the sum of labels of all edges incident to this vertex, in this paper, we deal with the problem of finding vertex antimagic edge labeling for some special families of graphs called strong face graphs. We prove that vertex antimagic, edge labeling for strong face ladder graph ????????∗, strong face wheel graph ????????∗, strong face fan graph ????????∗, strong face prism graph (????????×????2)∗and finally strong face friendship graph (????????)∗.

The focus of this paper is the presentation of a new type of mapping called projection Jungck zn- Suzuki generalized and also defining new algorithms of various types (one-step and two-step algorithms) (projection Jungck-normal N algorithm, projection Jungck-Picard algorithm, projection Jungck-Krasnoselskii algorithm, and projection Jungck-Thianwan algorithm). The convergence of these algorithms has been studied, and it was discovered that they all converge to a fixed point. Furthermore, using the previous three conditions for the lemma, we demonstrated that the difference between any two sequences is zero. These algorithms' stability was demonstrated using projection Jungck Suzuki generalized mapping. In contrast, the rate of convergence of these algorithms was demonstrated by contrasting the rates of convergence of the various algorithms, leading us to conclude that the projection Jungck-normal algorithm is the fastest of all the algorithms mentioned above.

In this paper, we present the almost approximately nearly quasi compactly packed (submodules) modules as an application of the almost approximately nearly quasiprime submodule. We give some examples, remarks, and properties of this concept. Also, as the strong form of this concept, we introduce the strongly, almost approximately nearly quasi compactly packed (submodules) modules. Moreover, we present the definitions of almost approximately nearly quasiprime radical submodules and almost approximately nearly quasiprime radical submodules and give some basic properties of these concepts that will be needed in section four of this research. We study these two concepts extensively.

A complete metric space is a well-known concept. Kreyszig shows that every non-complete metric space ????can be developed into a complete metric spaceŴ, referred to as completion of ????. We use the b-Cauchy sequence to form ????̂which “is the set of all b-Cauchy sequences equivalence classes”. After that, weprove ????̂t o be a 2-normed space. Then, we construct an isometric by defining the function from W to Ŵ0; thus Ŵ0and Ware isometric, where Ŵ0is the subset of Ŵcomposed of the equivalence classes that contains constant b-Cauchy sequences. Finally, we prove that ????̂0is dense in ????̂, ????̂is complete and the uniqueness of ????̂is up to isometrics.

The transportation problem (TP) is employed in many different situations, such as scheduling, performance, spending, plant placement, inventory control, and employee scheduling. When all variables, including supply, demand, and unit transportation costs (TC), are precisely known, effective solutions to the transportation problem can be provided. However, understanding how to investigate the transportation problem in an uncertain environment is essential. Additionally, businesses and organizations should seek the most economical and environmentally friendly forms of transportation, considering the significance of environmental issues and strict environmental legislation. This research employs a novel ranking function to solve the transportation problem (TP), where fuzzy triangular numbers represent the fuzzy demand and supply (DAS). The fuzzy model is transformed and compressed to a crisp model (CM), and the results are compared using the northwest corner method and the least cost method. In addition, a numerical example of the fuzzy transportation model (FTM) is shown.

Transformation and many other substitution methods have been used to solve non-linear differential fractional equations. In this present work, the homotopy perturbation method to solve the non-linear differential fractional equation with the help of He’s Polynomials is provided as the transformation plays an essential role in solving differential linear and non-linear equations. Here is the α-Sumudu technique to find the relevant results of the gas dynamics equation in fractional order. To calculate the non-linear fractional gas dynamical problem, a consumer method created on the new homotopy perturbation a-Sumudu transformation method (HP TM) is suggested. In the Caputo type, the derivative is evaluated. a-Sumudu homotopy perturbation technique and He’s polynomials are all incorporated in the HPSaTM. The availability of He’s polynomials could be used to conveniently manage the non-linearity. The suggested approach shows that the strategy is simple to implement and provides results that can be compared to the results gained from any other transformation technique.

Csaszar introduced the concept of generalized topological space and a new open set in a generalized topological space called -preopen in 2002 and 2005, respectively. Definitions of -preinterior and -preclosuer were given. Successively, several studies have appeared to give many generalizations for an open set. The object of our paper is to give a new type of generalization of an open set in a generalized topological space called -semi-p-open set. We present the definition of this set with its equivalent. We give definitions of -semi-p-interior and -semi-p-closure of a set and discuss their properties. Also the properties of -preinterior and -preclosuer are discussed. In addition, we give a new type of continuous function in a generalized topological space as -semi-p-continuous function and -semi-p-irresolute function. The relationship between them are showen. We prove that every -open ( -preopen) set is an -semi-p-open set, but not conversely. Every -semi-p-irresolute function is an -semi-p-continuous function, but not conversely. Also we show that the union of any family of -semi-p-open sets is an -semi-p-open set, but the intersection of two -semi-p-open sets need not to be an -semi-p-open set.

This paper provides a four-stage Trigonometrically Fitted Improved Runge-Kutta (TFIRK4) method of four orders to solve oscillatory problems, which contains an oscillatory character in the solutions. Compared to the traditional Runge-Kutta method, the Improved Runge-Kutta (IRK) method is a natural two-step method requiring fewer steps. The suggested method extends the fourth-order Improved Runge-Kutta (IRK4) method with trigonometric calculations. This approach is intended to integrate problems with particular initial value problems (IVPs) using the set functions and for trigonometrically fitted. To improve the method's accuracy, the problem primary frequency is used. The novel method is more accurate than the conventional Runge-Kutta method and IRK4. Several test problems for the system of first-order ordinary differential equations carry out numerically to demonstrate the effectiveness of this approach. The computational studies show that the TFIRK4 approach is more efficient than the existing Runge-Kutta methods.

The class of quasi semi -convex functions and pseudo semi -convex functions are presented in this paper by combining the class of -convex functions with the class of quasi semi -convex functions and pseudo semi -convex functions, respectively. Various non-trivial examples are introduced to illustrate the new functions and show their relationships with -convex functions recently introduced in the literature. Different general properties and characteristics of this class of functions are established. In addition, some optimality properties of generalized non-linear optimization problems are discussed. In this generalized optimization problems, we used, as the objective function, quasi semi -convex (respectively, strictly quasi semi -convex functions and pseudo semi -convex functions), and the constraint set is -convex set.

For the generality of fuzzy ideals in TM-algebra, a cubic ideal in this algebra has been studied, such as cubic ideals and cubic T-ideals. Some properties of these ideals are investigated. Also, we show that the cubic T-ideal is a cubic ideal, but the converse is not generally valid. In addition, a cubic sub-algebra is defined, and new relations between the level subset and a cubic sub-algebra are discussed. After that, cubic ideals and cubic T-ideals under homomorphism are studied, and the image (pre-image) of cubic T-ideals is discussed. Finally, the Cartesian product of cubic ideals in Cartesian product TM-algebras is given. We proved that the product of two cubic ideals of the Cartesian product of two TM-algebras is also a cubic ideal.

The aim of this article, we define new iterative methods called three-step type in which Jungck resolvent CR-iteration and resolvent Jungck SP-iteration are discussed and study rate convergence and strong convergence in Banach space to reach the fixed point which is differentially solve of nonlinear equations. The studies also expanded around it to find the best solution for nonlinear operator equations in addition to the varying inequalities in Hilbert spaces and Banach spaces, as well as the use of these iterative methods to approximate the difference between algorithms and their images, where we examined the necessary conditions that guarantee the unity and existence of the solid point. Finally, the results show that resolvent CR-iteration is faster than resolvent Jungck SP-iteration using Jungck resolvent estimation.

This paper derives the EDITRK4 technique, which is an exponentially fitted diagonally implicit RK method for solving ODEs . This approach is intended to integrate exactly initial value problems (IVPs), their solutions consist of linear combinations of the group functions and for exponentially fitting problems, with being the problem’s major frequency utilized to improve the precision of the method. The modified method EDITRK4 is a new three-stage fourth-order exponentially-fitted diagonally implicit approach for solving IVPs with functions that are exponential as solutions. Different forms of -order ODEs must be derived using the modified system, and when the same issue is reduced to a framework of equations that can be solved using conventional RK approaches, numerical comparisons must be done. The findings show that the novel approach is more efficacious than previously published methods.

The Population growth and decay issues are one of the most pressing issues in many sectors of study. These issues can be found in physics, chemistry, social science, biology, and zoology, among other subjects.
We introduced the solution for these problems in this paper by using the SEJI (Sadiq- Emad- Jinan) integral transform, which has some mathematical properties that we use in our solutions. We also presented the SEJI transform for some functions, followed by the inverse of the SEJI integral transform for these functions. After that, we demonstrate how to use the SEJI transform to tackle population growth and decay problems by presenting two applications that demonstrate how to use this transform to obtain solutions.
Finally, we conclude that the SEJI transform can readily solve the problems of population increase and decay, and that the action of this integral transform in overcoming these challenges can be explained through applications.

A non-polynomial spline (NPS) is an approximation method that relies on the triangular and polynomial parts, so the method has infinite derivatives of the triangular part of the NPS to compensate for the loss of smoothness inherited by the polynomial. In this paper, we propose polynomial-free linear and quadratic spline types to solve fuzzy Volterra integral equations (FVIE) of the 2nd kind with the weakly singular kernel (FVIEWSK) and Abel's type kernel. The linear type algorithm gives four parameters to form a linear spline. In comparison, the quadratic type algorithm gives five parameters to create a quadratic spline, which is more of a credit for the exact solution. These algorithms process kernel singularities with a simple technique. Illustrative examples use MathCad software to deal with upper and lower-bound solutions to fuzzy problems. The method provides a reliable way to ensure that an exact solution is approximated. Also, figures and tables show the potential of the method.

With the development of high-speed network technologies, there has been a recent rise in the transfer of significant amounts of sensitive data across the Internet and other open channels. The data will be encrypted using the same key for both Triple Data Encryption Standard (TDES) and Advanced Encryption Standard (AES), with block cipher modes called cipher Block Chaining (CBC) and Electronic CodeBook (ECB). Block ciphers are often used for secure data storage in fixed hard drives, portable devices, and safe network data transport. Therefore, to assess the security of the encryption method, it is necessary to become familiar with and evaluate the algorithms of cryptographic systems. Block cipher users need to be sure that the ciphers they employ are secure against various attacks.
A Fully Connected Neural Network (FCNN) model was initially used to assess how well the models were classified. Then, all models, including encoder models, were assessed using True Positive (TP) measures for successful classification of the discovered encoder and False Positive (FP) measures for imprecise categorization. The accuracy value, retrieval, loss, precision value, and F1 score were then calculated using a confusion matrix to assess the model's efficacy (abbreviated as F1). ECB results with an accuracy of 85% and CBC results with an accuracy of 88% were produced, and the parameters of the FCNN model were tweaked to provide better results. These results helped to identify the encryption algorithm more precisely and evaluate it.